開料沖孔端末一體機(集氣專機)
產品名:開料沖孔端末一體機(集氣專機)
開料沖孔端末一體機(集氣專機)
產品介紹與參數

開料沖孔端末一體機(集氣專機)

CUTTING AND PUNCHING MACHINE


1、該機針對12.7~19.05銅管需要大小孔沖孔翻邊、兩頭封口或擴縮口的集氣管類型產品的加工而設計,設計加工長度為700mm以下。

2、該設備可實現盤管校直開料、擴口、沖大小翻邊孔、兩端端末加工,全自動生產

3、本生產線將以上所有功能均整合在一臺機上完成、由五個移料機械手完成工件在各工位的轉換及卸料。

4、配一位放料架,具有自動升降功能、上料方便。


1、The machine is designed for the processing of 12.7~19.05 copper pipes which need punching and flanging of large and small holes, sealing at both end or expanding and shrinking openings. The designed processing length is less than 700mm.

2、The machine can be used to process the end hole of the coil pipe first, straighten the end of the pipe and then turn over the hole.

3、This production line integrates all the above functions into one machine, and five i-transfer manipulators complete the conversion and unloading of working in the each station

4、Equipped with a inclined discharging rack , with automatic lifting function


  二、參數說明

Technical parameters:

原材料(Raw material)

軟態銅管,盤管φ12.7~φ19.05,壁厚0.81.2mm

工件長度length

150~700mm

工位數position

五工位five position

小翻邊孔尺寸Specification of draw hole(low)

ID7~ID9.52

翻邊孔尺寸Specification of draw hole(big)

(φ9.5~φ15

整機功率motor power

10KW

外形尺寸External dimension

(長**高)2100*1800*1800mm (L*W*H)

電源Power

380±10V, 50HZ