全自動長U彎管機
Automatic long U tube bending machine
全自動長U 管彎管機設備是將卷盤料銅管經由主動放料、校圓、校直、送料、定尺無屑切割、折彎、退料等全自動工作程序完成，除人工裝盤管和人工引料之外的長U 管彎制工作。
The automatic long U tube bending machine is used to complete the bending work of long U-tube, except for the manual installation of coil and manual feeding, by means of automatic working procedures such as active discharging, straightening, feeding, cutting, bending and returning.
參數說明 technical parameters:
|
銅管規格 Specification of copper tube |
銅管為T2M，TP2M每次折4根，壁厚0.22-0.41 Copper tubes ae TP2M folds 4 pcs each time;wall thickness 0.22-0.41 |
|
中心距centre distance |
±0.1mm |
|
折彎后工件長度length of work piece after bending |
220～2200mm |
|
折彎速度（L ≤300時）bending speed (when L ≤300) |
L ≤300 :t < 8 - 12 秒/S |
|
1）彎曲部橢圓度ovality of bending part |
2.5%以內 within 2.5% |
|
彎曲部減薄率thinning rate of bending part |
10%以內 within 10% |
|
彎曲后端口差 difference of tube ends after bending |
1.0mm以內within1.0mm |
|
控制方式 control mode |
PCL控制+觸摸屏 Controlled by PCL+touch screen |
|
電源power |
380V三相 50Hz 380V 3phases 50Hz |
|
液壓系統壓力pressure of hydraulic system |
0～7Mpa |
|
外形尺寸（長*寬*高）extemal dimension (L*W*H) |
4200*1040*1350mm(供參考For reference) |